CANTON - CIC 465 6″ In-Ceiling Speaker (pair)
Out of stock
Canton inCeiling systems are connected with the amplifier via two- conductor loudspeaker cable. The gauge of cable required depends on its length. All inWall/inCeiling systems are fitted with gilded clamp terminals, which can take a cable up to 10 mm2 in diameter.
• 6 Inch Driver
• 2-way Free Air System
• Made in Germany
$499.00$599.00
Out of stock
Compare| Nom. /Music power handling | 60 / 110 watts |
|---|---|
| SPL (1 watt/1m) | 87 db |
| Frequency response | 45…30.000 Hz |
| Crossover frequency | 3.300 Hz |
| Woofer | 1 x 165 mm (6''), polypropylene |
| Tweeter | 1 x 25 mm (1''), Fabric |
| Special Features | Adjustable tweeter |
| Nominal Impedance | 8 ohms |
| Diameter (Ø) | 23.8 cm (9.4'') |
| Installation opening | 20.4 cm (8'') |
| Installation depth | 8.4 cm (3.3'') |
| Weight | 1.5 kg |
Be the first to review “CIC 465 6″ In-Ceiling Speaker (pair)”
Related Products
KEF - CI160CSDS
Dual Stereo
The KEF Ci Series Dual Stereo models are high-fidelity flush-mount speakers that recreates stereo, and are ideal for locations where there is only room for one speaker. Thanks to KEF’s simple and ingenious screw down clamping system – with moisture-resistant fixings – you can place these speakers in environments such as bathrooms or under eaves.
KEF - Ci130QR
Featuring the KEF’s unique asymmetrical tweeter island, this configuration reduces high frequency diffraction and aligns the off-axis power response of the tweeter and woofer to make the speaker almost as placement friendly as Uni-Q. Combining impeccable sound quality with the elegant ultra-thin bezel (UTB), the Ci C Series range is part of how to “Hide your speakers, not your sound.”
Features
• UTB™ Ultra Thin Bezel
• Asymmetrical tweeter island for wide off-axis response
• 19mm (0.75in.) Aluminium dome tweeter and ‘tangerine’ waveguide
• 130mm (5.25in.) extended response bass driver
CANTON - CIC 865 6″ In-Ceiling Speakers (pair)
CANTON - CIC 865 6″ In-Ceiling Speakers (pair)
$639.00$749.00Read more
CANTON - CIC 865 6″ In-Ceiling Speakers (pair)
Canton inCeiling systems are connected with the amplifier viatwo- conductor loudspeaker cable. The gauge of cable required depends on its length. All inWall/inCeiling systems are fitted with gilded clamp terminals, which can take a cable up to 10 mm2 in diameter
|
|
|
|
|
|
|
|
|
|
|
|
Cambridge Audio - C46 In-Ceiling Speaker (each)
Cambridge Audio - C46 In-Ceiling Speaker (each)
$149.00$169.00Read more
Cambridge Audio - C46 In-Ceiling Speaker (each)
The C46 uses a single 2.25” BMR driver to seamlessly cover the entire frequency range from 120Hz to 20kHz.
Our proprietary Balanced Mode Radiator speaker design provides unrivalled sound dispersion and across the board frequency response, by combining ‘bending wave’ and pistonic movements.
Add to this the C46s flexible installation options, being small enough to fit in a standard 3” ceiling spotlight hole, and you can see why it’s one of our most popular products!
Elac - IC1010 6″ In-Ceiling Speaker (each)
Elac - IC1010 6″ In-Ceiling Speaker (each)
$599.00Read more
Elac - IC1010 6″ In-Ceiling Speaker (each)
Sound from on-high.
That’s the way that ELAC Custom Install line of speakers fit into your lifestyle. What separates these ELAC models from all the rest is their sound, performance and durability. These speakers receive the same attention to design as other ELAC speakers, and use the same high-quality drivers and components, with build quality and reliability that far surpasses other products in the so-called custom installation arena.
Sounds bigger than it is.
This in-ceiling design performs to real hi-fi standards. Thanks to its round shaped mounting hole, this coaxial in-ceiling speaker can be mounted into ceilings and even walls. Because of its nominal impedance of 8 Ω, the IC 1010 is cascadable and can easily be connected to all kinds of amplifiers. Connect it and you’ll never need to touch it again.
Reviews
There are no reviews yet.