CANTON - CIC 465 6″ In-Ceiling Speaker (pair)
Out of stock
Canton inCeiling systems are connected with the amplifier via two- conductor loudspeaker cable. The gauge of cable required depends on its length. All inWall/inCeiling systems are fitted with gilded clamp terminals, which can take a cable up to 10 mm2 in diameter.
• 6 Inch Driver
• 2-way Free Air System
• Made in Germany
$499.00$599.00
Out of stock
| Nom. /Music power handling | 60 / 110 watts |
|---|---|
| SPL (1 watt/1m) | 87 db |
| Frequency response | 45…30.000 Hz |
| Crossover frequency | 3.300 Hz |
| Woofer | 1 x 165 mm (6''), polypropylene |
| Tweeter | 1 x 25 mm (1''), Fabric |
| Special Features | Adjustable tweeter |
| Nominal Impedance | 8 ohms |
| Diameter (Ø) | 23.8 cm (9.4'') |
| Installation opening | 20.4 cm (8'') |
| Installation depth | 8.4 cm (3.3'') |
| Weight | 1.5 kg |
Be the first to review “CIC 465 6″ In-Ceiling Speaker (pair)”
Related Products
Cambridge Audio - C165 6.5″ In-Ceiling Speaker (each)
Cambridge Audio - C165 6.5″ In-Ceiling Speaker (each)
$269.00$299.00Read more
Cambridge Audio - C165 6.5″ In-Ceiling Speaker (each)
Our full range is IP65 rated for suitability in high-humidity and dusty environments. Use of plastic in the woofer prevents moisture absorption, produces a wider frequency response and provides greater control over cone movement.
The C165 uses a 6.5” woofer along with a 1” pivoting tweeter.
The pivoting tweeter provides ultimate customisation, to improve off-axis performance and control over the speaker crossover.
The C165 is optimised for integration across the entire audio band.
Cambridge Audio - C165SS 6.5″ Stereo In-Ceiling Speaker (each)
Cambridge Audio - C165SS 6.5″ Stereo In-Ceiling Speaker (each)
$299.00$349.00Read more
Cambridge Audio - C165SS 6.5″ Stereo In-Ceiling Speaker (each)
Our full range is IP65 rated for suitability in high-humidity and dusty environments. Use of plastic in the woofer prevents moisture absorption, produces a wider frequency response and provides greater control over cone movement.
The C165SS uses a 6.5” woofer along with two 0.5” tweeters.
Twin 0.5” tweeters provide stereo sound from a single speaker, for arrangements which are short on space. Customers use this speaker for wet rooms and other environments with limited space for installing speakers.
Elac - IC1010 6″ In-Ceiling Speaker (each)
Elac - IC1010 6″ In-Ceiling Speaker (each)
$599.00Read more
Elac - IC1010 6″ In-Ceiling Speaker (each)
Sound from on-high.
That’s the way that ELAC Custom Install line of speakers fit into your lifestyle. What separates these ELAC models from all the rest is their sound, performance and durability. These speakers receive the same attention to design as other ELAC speakers, and use the same high-quality drivers and components, with build quality and reliability that far surpasses other products in the so-called custom installation arena.
Sounds bigger than it is.
This in-ceiling design performs to real hi-fi standards. Thanks to its round shaped mounting hole, this coaxial in-ceiling speaker can be mounted into ceilings and even walls. Because of its nominal impedance of 8 Ω, the IC 1010 is cascadable and can easily be connected to all kinds of amplifiers. Connect it and you’ll never need to touch it again.
KEF - Ci200QR
Featuring KEF’s sophisticated ’sit anywhere’ Uni-Q driver array, which places the tweeter in the acoustic centre of the bass/midrange cone, this allows both the tweeter and woofer to act as a single point source that disperses the sound widely and evenly throughout the room. Together with the discreet Ultra Thin Bezel (UTB) design, offering the slimmest possible visible rim around the speaker, the Ci Q Series range gives you tremendous freedom to position the speakers where you please.
Features
• UTB™ Ultra Thin Bezel
• 200mm (8.0in.) Uni-Q driver array
• 25mm (1.0in.) Aluminium dome tweeter and ‘tangerine’ waveguide
• Gold plated spring loaded binding posts
CANTON - CIC 865 6″ In-Ceiling Speakers (pair)
CANTON - CIC 865 6″ In-Ceiling Speakers (pair)
$639.00$749.00Read more
CANTON - CIC 865 6″ In-Ceiling Speakers (pair)
Canton inCeiling systems are connected with the amplifier viatwo- conductor loudspeaker cable. The gauge of cable required depends on its length. All inWall/inCeiling systems are fitted with gilded clamp terminals, which can take a cable up to 10 mm2 in diameter
Reviews
There are no reviews yet.