Cambridge Audio - AZUR851E
Out of stock
FLAGSHIP PREAMPLIFIER
The pre-amp stage is all about minimal colouration. Take the source signal and pass it onto the power amp stage with as little interference as possible. That’s exactly what the 851E does, and coupled with its solid-state volume control, it retains audio signal purity and precision even at the lowest listening levels.
The toroidal transformer helps, as does our insistence on using only audiophile-grade components; many hours of fine tuning also play their part. The 851E has a broad range of connection options, including three switchable between unbalanced RCA and balanced XLR, the later ideal for high-end sources. Traditional sources get six RCA unbalanced inputs, plus there’s a dedicated sub woofer output and two sets of speaker terminals.
The 851E is designed as the partner to the 851W and to this end it has control bus connections for power syncing, as well as a Terrapin impedance buffering module for seamless switching between sources. The result is a combination that’s comfortably the most musically thrilling we’ve ever made: detailed, powerful, nuanced.
$2,490.00
Out of stock
CompareBe the first to review “AZUR851E” Cancel reply
Related Products
$2,490.00Read more
Cambridge Audio - AZUR851C
Cambridge Audio - AZUR851C
$2,490.00Read more
$2,490.00Read more
Cambridge Audio - AZUR851C
FLAGSHIP UPSAMPLING DAC, CD PLAYER & PREAMPLIFIER
Our finest CD player and DAC, the 851C uses our extensive digital knowledge to become the cornerstone of your digital hub. No matter the source of your digital music, twin DACs in dual differential mode and 2nd generation Adaptive Time Filtering make the music sound as the original artist intended – extraordinary.
To make the 851C we used all our hi-fi know-how. So it has a toroidal transformer and audiophile components, and a signal path that’s been revised and tweaked for the cleanest route possible. It’s built to connect with as many sources as possible, with optical and co-axial digital in and outputs, XLR and RCA outputs, plus a USB audio input for your PC.
That the 851C is an exceptional CD player is beyond doubt. It has our high performance S3 Custom Servo for remarkable error-free data retrieval, while the twin DACs upsample data to 24-bit standard. But the 851C is also a pre-amp, so can be directly connected to a power amp or active speakers for further sonic benefits.
$2,999.00Read more
ROTEL - RSX-1562
RSX-1562 Surround Receiver
The RSX-1562 builds upon the excellence established by its highly acclaimed
predecessor, the RSX-1560, but with the addition of new, improved circuitry
and technologies such as HDMI® 1.4 with 3D. In addition, the advent of so
many video sources such as a cable or satellite box, DVRs, DVD players, and
WiFi or Ethernet audio / video feeds from devices such as Apple TV® and
Roku® etc., have necessitated adding more HDMI inputs.
The RSX-1562 now has six HDMI 1.4 inputs and two HDMI 1.4 outputs, one
with an Audio Return Channel (ARC). The ARC in HDMI 1.4 enables a TV via
a single HDMI cable, to send audio data “upstream” to an A/V receiver or
surround audio controller, increasing user flexibility and eliminating the need
for any separate S/PDIF audio connection.
$699.00Add to cart
YAMAHA - WXA-50
The WXA-50 is a flexible 2.1 channel amplifier capable of effortlessly powering any pair of speakers. Its convenient design makes it perfect to pair with in-ceiling or outdoor speakers where long speaker cable runs are not possible.
- Simply by adding to your speaker system, enjoy streaming music or a full MusicCast (multi-room audio) system
- 2.1-Channel powerful sound
- — 90 W per channel (6 ohms, 1 kHz, 0.9 % THD, 1-ch driven)
- — 70 W per channel (6 ohms, 20 Hz-20 kHz, 0.06 % THD, 2-ch driven)
- Compatible with all types of music sources and services, such as streaming services
- MusicCast App for easy operation. The app lets you control other MusicCast-compatible components
- One push play — Pressing any button turns the unit on and initiates playback of the previously selected source
- Retro modern and superior quality
- 48-bit digital volume control is far greater than the input signal bit resolution, achieving high quality control
- Supports DSD 5.6 MHz and FLAC / WAV / AIFF 192 kHz / 24-bit for high resolution reproduction
- Compact body only 214 mm (8-3/8″) wide fits in any convenient location, can be used horizontally or vertically.
- Easy installation – Suitable size for 1U rack with a width of 214 mm (8-3/8″) and height of 42 mm (1-5/8″) (without feet).
- Low standby power consumption: 1.8 W
$8,999.00Read more
YAMAHA - A-S3000
Bringing to the fore a passion for music, technological expertise and desire to provide the ultimate sonic experience, Yamaha engineers have redefined how a high-end Amplifier should perform. Introducing Yamaha’s flagship A-S3000.
- Rigid Streamlined Construction – provides strict anti-vibration protection and enables shortest cabling routes
- Large toroidal transformer, solidly mounted with independent three-dimensional inner frame
- Comprehensive low impedance design, shortened signal paths and copper-plated chassis
- 6 mm thick top panel made of non-magnetic aluminium plate
- Left-right symmetrical design for independent pre amp and power amp blocks
- Floating and Balanced Power Amplifier with MOSFETs
- All-stage balanced transmission
- Direct drawing toroidal transformer for complete elimination of signal transmission loss
- Exceptionally low impedance through secure screw connections
- Superior quality electronic volume control for optimum sound
- Discretely configured phono amp
- Exquisite, large level meters reflect the dynamics in the music
- Meticulously designed and beautiful in appearance – just like a musical instrument
- Original speaker terminals for high sound quality, as well as beauty and ease of use
- Obsessive, meticulous switch design – elaborate, richly textured and easy-to-use
$1,290.00Read more
PEO-JECT - PHONO BOX RS
PEO-JECT - PHONO BOX RS
$1,290.00Read more
$1,290.00Read more
PEO-JECT - PHONO BOX RS
Reference class phono preamplifier with unique impedance control
This ultra low noise and distortion preamplifier is made for the audio conniosseur and offers not only breathtaking performance but is capable to adapt to virtually any phono cartridge through variable impedance control. Impedance adjustment can be done while playback! Due to use of best parts, like SSM2019 from Analog Devices as input stages and Linear Technology LT1010 as high current buffer stage, Phono Box RS delivers ultra low levels of distortion and noise. Its very low output impedance makes it insensitive to selection of interconnect cables and lenghts.
Fully passive RIAA and DECCA equalisation is selectable. Phono Box RS offers fully balanced circuitry and both XLR and RCA inputs and outputs. All in all vinyl playback will never have sounded as clear, detailed and smooth, than with this superlative phono stage!
$2,999.00Read more
YAMAHA - Aventage RXA-3080 11.2ch AV Receiver
YAMAHA - Aventage RXA-3080 11.2ch AV Receiver
$2,999.00Read more
$2,999.00Read more
YAMAHA - Aventage RXA-3080 11.2ch AV Receiver
9.2-channel AVENTAGE model featuring the latest, most advanced Surround:AI, highest quality DACs, and ultimate quality XLR terminals.
- 9-channel powerful surround sound
- — 150 W per channel (8 ohms, 20 Hz-20 kHz, 0.06% THD, 2-ch driven)
- — 230 W per channel (4 ohms, 1 kHz, 0.9% THD, 1-ch driven)
- — 230 W per channel (8 ohms, 1 kHz, 10% THD, 1-ch driven)
- Surround:AI automatically optimises the surround effect in real time
- Dolby Atmos® and DTS:X™ with CINEMA DSP HD3
- ESS SABRE PRO ES9026PRO Ultra DAC and SABRE ES9007S DAC
- Ability to add wireless surround speaker/s* (*MusicCast 20 or MusicCast 50)
- Amazon Alexa voice control compatibility *Amazon Echo Dot included
- Highly rigid construction including Anti Resonance Technology (A.R.T.) Wedge
- High quality parts for optimum performance
- YPAO™-R.S.C. (with 3D, multi-point measurement and 64-bit high precision EQ)
- XLR input terminal
- MusicCast multi-room technology
- Music streaming services built-in
- HDMI® (7 in / 3 out) with Dolby Vision™ and Hybrid Log-Gamma
- Phono input for vinyl playback
Reviews
There are no reviews yet.