Elac - ELAC Vertex III JET 6.5″ In-Wall Speaker (Each)
In stock
Vertex III – 6.5″ In-Wall Speaker with JET (Each)
Using the same technology and materials as the highly acclaimed Vela speaker line, the Vertex Series III combines the aesthetics of an architectural speaker with the performance and dynamics of the Vela series. The easily installed Vertex Series III speakers utilize the same components throughout the series to ensure a perfect sonic match across the line. Keeping with the philosophy of our famous Jet tweeter sound, Vertex series III speakers will complement any environment.
Bringing Core Technology
To Custom Audio
JET Folded Air-Motion-Transformer ELAC’s JET tweeters enthral with its lightning-fast response and wide dynamic range, offering minimal distortion and lots of headroom. A deep spheroid Waveguide is used to improve directivity control and efficiency. Custom-designed Crystal Membrane Aluminum Woofer ELAC’s unique Crystal Membrane woofer is extremely rigid, yet light weight. This woofer is specifically designed to keep up with the speed of the JET Tweeter while delivering detail in low frequency response.
$1,799.00
Available on backorder
The inimitable JET tweeter
JET 5
JET Technology
ELAC’s Air Motion Tweeter
Air Motion Transformer principle
Linear Frequency response > 50 kHz
Extended lower frequency range
Efficiency 92 dB / W / m
Improved signal accuracy
Ultra fast transient response – detail resolution
AS-XR Technology
Crystal Membrane
The eye-catching surface of the crystal membrane is more than just an attractive design feature.
Increased stiffness through crystal shape of aluminum cone
Extended frequency range (XR), smooth roll-off
Excellent large signal behaviour
Minimized VAS, (lot of bass out of small cabinets)
| Speaker type | 2-way, rear side open |
|---|---|
| Tweeter | Jet Folded Ribbon |
| Woofer | 6 – inch Crystal Aluminum Cone |
| Crossover frequency | 3,000 Hz |
| Frequency response | 45 to 40,000 Hz |
| Sensitivity | 88 db at 2.83 v/1m |
| Recommended Aplifier Power | 40 to 120 Watts |
| Nominal/peak power handling | 50/120 Watts |
| Nominal impedance | 4 Ohm |
| Finish | Black baffle/White grille |
| Grille | Metal magnetic / Paintable |
| Accessories included | Cutout template, manual |
| Dimensions (diameter) | H: 12.69 in / 322.3 mm W: 8.48 in / 215.3 mm D: 4.04 in / 102.5 mm |
| Cut-out (diameter) | H: 11.61 in / 295 mm W: 7.36 in / 187 mm |
| Mounting depth | 3.94 in / 100 mm |
Related Products
KEF - Ci200CL
Featuring the KEF’s unique asymmetrical tweeter island, this configuration reduces high frequency diffraction and aligns the off-axis power response of the tweeter and woofer to make the speaker almost as placement friendly as Uni-Q. Combining impeccable sound quality with the elegant ultra-thin bezel (UTB), the Ci C Series range is part of how to “Hide your speakers, not your sound.”
Fast and Easy to Install
KEF’s Ci loudspeaker design makes them so quick and easy to install that once the wire is run and the hole is cut in your wall or ceiling you can be listening to music in less than two minutes.
KEF - Ci160QS
Featuring KEF’s sophisticated ’sit anywhere’ Uni-Q driver array, which places the tweeter in the acoustic centre of the bass/midrange cone, this allows both the tweeter and woofer to act as a single point source that disperses the sound widely and evenly throughout the room. Together with the discreet Ultra Thin Bezel (UTB) design, offering the slimmest possible visible rim around the speaker, the Ci Q Series range gives you tremendous freedom to position the speakers where you please.
Fast and Easy to Install
KEF’s Ci loudspeaker design makes them so quick and easy to install that once the wire is run and the hole is cut in your wall or ceiling you can be listening to music in less than two minutes.
KEF - Ci160CS
Featuring the KEF’s unique asymmetrical tweeter island, this configuration reduces high frequency diffraction and aligns the off-axis power response of the tweeter and woofer to make the speaker almost as placement friendly as Uni-Q. Combining impeccable sound quality with the elegant ultra-thin bezel (UTB), the Ci C Series range is part of how to “Hide your speakers, not your sound.”
Fast and Easy to Install
KEF’s Ci loudspeaker design makes them so quick and easy to install that once the wire is run and the hole is cut in your wall or ceiling you can be listening to music in less than two minutes.
