AIM ATS 500 Series 2 Dolby Atmos Enabled Speaker System includes the following; ATX100 Dolby Atmos Enabled In-Wall Height Speaker + AIM LCR5 FIVE Series 2 In-Wall LCR Speaker + GRLATXAIM2 AIM Series 2 Dolby Atmos Enabled System Grille Kit
ATX100 Features at a Glance
- The first available, Dolby Atmos® Enabled Architectural In-Wall Height Speaker Module
- Flangeless Appearance with Magnetically Attached, Low Profile, Full Coverage Grille
- Meets / Exceeds Dolby Atmos® Enabled Requirements for Residential Applications
- 2-Way Speaker Compliment in MTM (Mid-Tweet-Mid) Alignment
- Dual, 2 ½” FEA Optimized Kevlar Reinforced Pulp Mid-Bass Drivers
- Atmos Height Cue Design
- Extended pole pieces
- Deep Motor Design
- Copper Shorting Rings
- Til Glass Fiber Former
- Dual Layer High Inductance Voice Coil
- Copper Clad Aluminum Voice Coil (CCAW)
- ¾” Custom Titanium Dome Tweeter with High Energy Neodymium Magnet Structure
- Acoustically Controlled Wave Guide
- AIT (Acoustic Isolation Technology) to Minimize Acoustic Energy Transfer to Mounting and Surrounding Surfaces
- Fully Integrated, Acoustic Back-box for Precise Sound Reproduction and Minimization of Sound Transmission to Adjacent Rooms
- Sensitivity: Greater Than 89dB 1W/1m
- Power Handling: 125 Watts
- Impedance: 8 Ohm
- Frequency Response: 90Hz – 20kHz
- Overall Dimensions (HxWxD): 12 ¼” x 9” x 3 15/16”
- (310mm x 229mm x 100mm)
- Cut-Out Dimension (HxW): 11” x 7 ¾”
- (279mm x 197mm)
AIM LCR5 FIVE Series 2 Features at a Glance
- Flangeless Appearance with Magnetically Attached, Low Profile, Full Coverage Grille
- 2-Way Speaker Compliment in MTM (Mid-Tweet-Mid) Alignment
- Dual, 5 ¼” FEA Optimized Woven Kevlar Cones
- Angled to prevent Lobing
- Extended Pole Pieces
- Forced Convection Cooling
- Core periphery vents with flux modulation control geometry
- Improve power handling
- Minimize the inductance modulation (change operating point of magnet structure so we are completely saturated and the coil cannot modulate the gap flux)
- 4 Layer High Inductance Voice Coil
- Controlled inductance for a smoother power response
- Copper Clad Aluminum Voice Coil (CCAW)
- FEA Optimized Woven Kevlar Cones
- High Loss Butyl Surrounds
- Deep Motor Design
- Kapton Formers
- Arrayed Point Source (APS) Tweeter Module
- Incorporating Three (3) Pivot-able, 1″ Custom Titanium Dome Tweeters
- Mounted on a Rotational Sound Baffle for Custom Sound Steering
- 2nd and 3rd Order Asymmetrical Crossover Design
- Pivot-able Sound Baffle for Precise AIM-ability of Acoustic Energy for Primary Assembly
- AIT (Acoustic Isolation Technology) to Minimize Acoustic Energy Transfer to Mounting and Surrounding Surfaces
- Sensitivity: Greater Than 91dB 1W/1m
- Power Handling: 190 Watts
- Impedance: 8 Ohm
- Frequency Response: 48Hz – 22kHz
- Product Dimensions (with grille on): 18 1/8″ x 9” x 3 7/8 (461 x 229 x 99mm)
- Cut-Out Diameter: 16 15/16” x 7 ¾” (430 x 197mm)
Reviews
There are no reviews yet.